Skip to content

MissionControl

Information

MissionControl is a sysmodule that allows you to pair normally-unsupported controllers as if they were natively supported, like PS3, PS4, PS5 and Xbox One S/X controllers via Bluetooth. The full supported controller list can be found on the official Github repository here including pairing instructions for the supported controllers.

Installation requirements:

  • An archive manager like 7-Zip
  • The latest release of MissionControl (the MissionControl-(version)-master.zip file)

Installation instructions:

  1. Boot into Hekate and go to Tools > USB Tools > SD Card, then plug your Switch into your PC via USB.
  2. Your microSD card should now be accessible on your PC, open it.
  3. Extract the .zip file to a location on your computer.
    • If your archive manager allows for it, you can also simply open the .zip file directly.
  4. Copy the contents of the (extracted) .zip file to the root of your microSD card.
    • Optional: You can verify if you've installed MissionControl correctly, you should have a folder called 010000000000BD00 (MissionControl) in sd:/atmosphere/contents.
  5. Boot into CFW.

Troubleshooting

My Switch crashes on boot after I installed MissionControl!:

Cause: If your Switch crashes with Error std::abort (0xFFE) and Title ID 010000000000BD00, you're using a version of MissionControl that's incompatible with your Atmosphere version. The expected Atmosphere version is mentioned on each release page of a MissionControl release.

 

MissionControl isn't working!:

Assuming you've followed the installation instructions successfully, this is probably due to the archive bit being set on one or more folders/files on your microSD card. This is usually the result of copying files to a microSD card via a Mac. If you are experiencing this issue, try running the archive bit fixer utility via Hekate for all files.

This can be done by booting into Hekate and going to Tools > Arch bit • RCM Touch • Pkg1/2 > Fix Archive Bit.